Gincor Trailer Werx Step Deck with Air Ramps
This is the ultimate machinery hauling trailer. Rear air ramps are lowered by a pneumatic cylinder rather than the commonly used expansion spring. This means a safer operation when lowering the ramps to the ground. A full width air ramp at the front of the lower deck allows for additional loading on the top of the deck. Fabricated into the neck of the trailer is an optional 17,500 lb winch complete with a wireless remote.
Trailer Features
Front Ramp
A full width air ramp at the front of the lower deck allows for additional loading on the top of the deck.
Crossmembers & Bolsters
Unlike our competition, we use a heavier crossmember & bolster top plates better suited for this type of trailer.
Rear Ramp
Rear air ramps are lowered by a pneumatic cylinder rather than the commonly used expansion spring. This means a safer operation when lowering the ramps to the ground.
Frame
100,000 psi hi-tensile 6” x 1/2” flanges and 3/16” x 1/4” webb, making a strong trailer with a long service life.
Wideload Lights
Standard equipped with two pairs of swing out wideload lights for when you need to haul wide equipment.
Load Securement
Equipped with (16) pair of D-rings & (11) 3-bar winches with J hooks opposite.
| Model | FD533AT |
| Step Deck Capacity | 45,000 kg GVWR, 70,000 lb. in 10' |
| Width | 9'6" |
| Length | 52'5" |
| Top Deck Length | 11'0" |
| Lower Deck Length | 34'6" |
| Deck Height | Upper deck: 60”, Lower deck: 41” Unladen |
| Upper Coupler | 5/16" @ 50" Height |
| King Pin Setting | 2” King pin @ 18” setting |
| Swing Radius | 82" |
| Frame | Hi-tensile manufactured single drop positive camber I beam |
| Side Rail | C6 Structural Channel @ 8.2 lb. ft. |
| Crossmembers | 4” Junior beam @ 12” spacing in gooseneck & lower deck, 4” Junior beam @ 9” spacing in beavertail |
| Landing Gear | (2) speed crank down – Crank located on road side |
| Deck Material | 1 1/8” Apitong wood, Two screws per board per crossmember |
| Front Ramp | Full width 67” L air lift ramp allowing loading on top deck |
| Beavertail | Full width 83” L @ 12 degree slope, High tensile steel top plates and traction bars in outside beavertail |
| Rear Ramp | (2) Flip-up 72” L x 37” W, Air assisted for ease of use, Air control valve mounted on side rail at rear |
| Load Securement | (16) pair of heavy duty “D” rings mounted on side rail: (3) on top deck, (11) pair on lower deck & (2) pair on beavertail, (11) 3-bar load winches on side rail, J hooks opposite |
| Storage | (1) Aluminum 18” x 18” x 48” Storage Box- Streetside |
| Suspension | (3) 25,000 lb. air ride c/w restraint chains, Manual dump valve & weigh gauge in weather proof box |
| Axles | (3) 25,000 lb. @ 83” track (9’0” wide over tires) |
| Axle Spacing | 60" |
| Brake Linings | 16.5” x 7” extended service brake linings, Enclosed S-camshafts |
| Brake Lubricant | Stemco Guardian seal & 80/90w oil |
| Slack Adjusters | Automatic slack adjusters |
| ABS System | Meritor/WABCO 2S/1M ABS |
| Hubs & Drums | 10 stud hub piloted, long stud, & outboard cast drums |
| Wheels | 10 stud 8.25 x 22.5 pilot mount steel - white |
| Tires | 255/70R-22.5, 16 ply on/off road radial |
| Electrical System | Integrated Wiring System, LED rubber shock mounted seal beam lamps, (2) Pair swing out wide load lights, (2) Strobe lights in rear frame c/w switch in dump valve box |
| Muflaps | Standard equipped full mud flap package |
| Finish | Sandblasted, primed, & painted with PPG urethane paint in (1) colour |
| Safety Tape | Applied as per regulations |
| Warranty | 1st year – 100% parts & labour; 2nd year – 50% parts & labour; 3rd to 5th year – 50% parts only |
- Tuff-Lift axle lift system (+)
- 120” L x 45” W Bi-fold style ramps
- 17.5K winch c/w wireless remote
- Aluminum toolbox
- Aluminum wheels, lightweight hubs and Centri-fuse drums
- Different deck lengths and widths
- Tri-drive compatible neck
- Available in tandem or tridem axle configuration
There are no videos at this time.
To view our inventory of in stock and on order step decks, click the button below.