Gincor Trailer Werx Step Deck with Beavertail
The Gincor Trailer Werx step deck with beavertail trailer is a great selection for step deck users who need easy loading from the rear. The spring assisted flip over beavertail ramps allow for easy and safe loading.
Trailer Features
Frame
100,000 psi high tensile steel is used for the flange and the webb, making this a strong trailer with a long service life.
Axles
Parallel axle spindles with larger inner and outer bearings increases fuel efficiency and wheel end life by lowering rolling resistance.
Two Speed Landing Gear
Standard equipped with Jost two-speed landing gear, which has a static load rating of 170,000 lbs.
Load Securement
Plenty of 3-bar winches and J hooks; all tested to meet current load securement regulations.
Aluminum Toolbox
(1) 18″ x 18″ x 48″ aluminum storage box. The toolbox utilizes a no-fuss locking system that won’t freeze up in the winter.
Beavertail
Full width 78”L tail, steel deck, traction bars, and 24”W x 76”L spring assisted flip over ramps.
| Model | FD533BT |
| Step Deck Capacity | 42,000 kg GVWR 80,000 lb in 10' |
| Width | 8'6" |
| Length | 52'4" |
| Top Deck Length | 11'0" |
| Lower Deck Length | 41'4" (includes beavertail) |
| Deck Height | Upper deck: 60” laden, Lower deck: 40" laden |
| Upper Coupler | 5/16" @ 48" Height |
| King Pin Setting | 2” King pin @ 18” setting |
| Swing Radius | 84" |
| Frame | High tensile manufactured single drop positive camber I beam, 5” x 3/8” T130 flanges & GR80W webb |
| Side Rail | 6” Formed channel @ 8.2 lb/ft |
| Crossmembers | 4" @ 3.2 lb/ft junior beam @ 12" spacing |
| Landing Gear | (2) speed crank down – Crank located on road side |
| Rub Rail | 3/8" x 3" flat bar full length of trailer mounted side rail |
| Stake Pockets | 4" Deep @ 48" o.c. on sides & (4) across front |
| Pipe Spool | Double 1.25" sch40 pipe spacers between stake pockets |
| Gooseneck Ramp | (2) 68" x 24" aluminum ramps c/w gooseneck storage |
| Beavertail | Full width 78" long tail c/w steel deck & traction bars |
| Rear Ramp | (2) 76" x 24" steel, spring assisted flip over, mounted on outside, (1) 76" x 42" steel, spring assisted flip over mounted in center, Ramps designed to be flush with deck height when folded over |
| Deck Material | 1 1/8” fir shiplap c/w (2) screws per board per crossmember, Coating of linseed oil applied |
| Load Securement | (22) 3-bar winches alternating from roadside to curbside, J hooks opposite winches mounted on side rail |
| Storage | (1) Aluminum 18” x 18” x 48” storage box - streetside |
| Suspension | (3) 25,000 lb. air ride, Manual dump valve & weigh gauge in weather proof box |
| Axles | (3) 25,000 lb. @ 77.5” track (8’6” wide over tires), Tapered bearing system |
| Axle Spacing | 60" |
| Brake Linings | 16.5” x 7” extended service brake linings |
| Brake Lubricant | Multi-grade 80/90W gear oil |
| Slack Adjusters | Crewson Stemco |
| ABS System | Meritor/WABCO 2S/1M ABS |
| Hubs & Drums | Steel 10 stud piloted hub & cast steel drums |
| Wheels | 10 stud 8.25 x 22.5 pilot mount steel - white |
| Tires | 255/70R-22.5, 16 ply on/off road radial |
| Electrical System | Integrated wiring harness system, LED rubber shock mounted seal beam lamps, (2) pair aluminbum telescopic wide load lights, (2) strobe lights in rear light panel c/w switch in dump valve box, Rear mounted 4 pin female electrical receptacle plug |
| Muflaps | Standard equipped full mud flap package |
| Finish | Sandblasted, primed, & painted with PPG urethane paint in (1) colour |
| Safety Tape | Applied as per regulations |
| Warranty | 1st year – 100% parts & labour; 2nd year – 50% parts & labour; 3rd to 5th year – 50% parts only |
- Aluminum load levelers bunk
- Available in various lengths and axle configurations
- Lightweight to extreme duty main frame design
- Tuff-Lift axle lift system (+)
- Lightweight wheels, hubs, and drums
- Onboard scale systems (+)
- Rear mount liveroll
- Oilfield style pin pockets
There are no videos at this time.
To view our inventory of in stock and on order step decks, click the button below.