The Canuck Quadaxle Wagon is built to last. With an extremely wear and crack resistant dump body, a 100,000 psi high tensile steel frame, you will feel confident hauling this trailer. The Gooseneck Style main frame combined with the R12 box lowers the center of gravity greatly improving the trailer’s stability when dumping. The Outside mount hoist ensures for a better clean out, meaning you won’t have to clean out the box after every load.
A Jost QT-100 heavy duty turntable is used for optimal life expectancy and maximum strength with minimum weight.
Engineered laser cut flared end crossmembers increase torsional twist strength making the trailer much more stable.
The Centerline box is constructed from 400-500 brinell strength steel which is extremely wear and crack resistant, giving you a long life cycle.
We use a 110,000 psi tensile frame flange AND webb, while the majority of other trailers only use high tensile flanges.
The radius 12 box design decreases material build up saves you time by not having to clean out the box after every load.
Parallel bearing axles reduce the amount of friction and thus heat on the brake components, ultimately allowing for easier pulling capabilities.
Model | R12-2500 Quad Axle Wagon |
Width | 8'6" |
Overall Length | 43'7" |
Box Floor Length | 25'0" |
Overall Height | 9'5" |
Sidewall Height | 42" |
Tailgate Height | 42" |
Capacity | 25.5 Cubic Yards |
Box | Quard 450, 4mm Steel rolled unibody D Shape Design. Square 6" x 4" tube style high tensile top beam. Quard 450, 3mm steel 48" forward slope bulkhead design. Outside mount hoist for better material cleanout. |
Frame | High Tensile main Frame and Turntable rails. The Frame consists of Engineering laser cut flared end crossmembers. Formed Aluminum walking deck on front turntable area. |
Hitch | Square tube style draw bar c/w rubber rushed pivot hinges. Premier heavy-duty low profile pintle eye c/w urethane bushings. (2) 3-ton safety hooks and transport 70 chain on underside of drawbar. |
Turntables | Rotek grease type roller bearing assembly. |
Hoist | Custom 8.5-250 stroke, 5 stage telescopic hoist. |
Suspension | (4) Hendrickson Intraax AAT25K, 25,000lb air ride suspension. |
Axles | (4) Henrickson 25,000lb axles. 77.5" axle track, 8'6" over tires. |
Brakes | 16 1/2 x 7" S-Cam quick change brakes and enclosed S-Cams. |
Hubs & Drums | (8) 10 Stud Steel piloted hubs and cast outboard drums. |
Wheels | (16) Aluminum 10 Stud Pilot mounted 8.25 x 24.5 - machined |
Tires | (16) Roadlux, 11R-24.5 on/off road radial tires. |
Electrical System | Voltflex integrated harness system. Voltflex LED Rubber mounted sealed lamps. Stop, turn and ID Lights are installed in rear of chassis. Front and Side Marker lights installed on the dump body. Midway turn lights installed on dump body. |
Fenders | Black plastic 180° Tub Style fenders over front and rear tires. |
Mudflaps | (2) Mudflaps mounted in front of 1st axle suspension | (4) Mudflaps mounted on back side of 2nd axle | (4) Mudflaps and anti-sail brackets mounted in front of 3rd axle | (4) Mudflaps mounted on back side of 4th axle. |
Load Cover | Michels Dura Flip PVC Solid load cover and electric winder. |
Finish | Sandblasted, epoxy primer and Endura Polyurethane Paint | Sideboards painted with Endura Polyurethane Paint | Reflective safety tape as required by federal regulations | Document holder mounted trailer main frame. |
Safety Tape | Reflected Safety Tape as required by Federal Regulations. |
Warranty | (5) Years on main frame rails | (3) Years on crossmembers and framing | (1) Year on all other parts manufactured by Canuck. |
There are no videos at this time.
To view our inventory of in stock and on order dump wagons, click the button below.