Centerline 40T Folding Neck Lowbed
Folding gooseneck lowbeds are the trailers of choice for operators needing a versatile solution with both rear and front loading abilities. The mechanical folding neck allows the trailer to be pulled in two positions: drop deck position for equipment with height constraints or with the neck straightened out to haul longer loads such as camp shacks.
Trailer Features
Gooseneck
We use a tapered full width pickup throat to aid in loading equipment over the gooseneck.
Split Liverolls
Air controlled high lift rear deck liverolls allow for easy unloading of short skid equipment.
Neck Liveroll
6” liveroll on back of gooseneck prevents tractor winch cable damage.
Rear Tail
Combination beavertail/flip over liveroll makes this trailer very versatile.
Center Liveroll
Air controlled high lift center deck liveroll allows for easy unloading of long skid equipment.
Load Securement
This trailer is equipped with chain pockets opposite each crossmember and (10) load winches.
| Model | SD40T-FG-3 |
| Folding Gooseneck Capacity | 40 ton distributed evenly over 20’ of deck |
| Width | 10'0" |
| Length | Liveroll down: 52’9”, Liveroll up: 51’6” |
| Main Deck Length | 26’ |
| Overall Lower Length | 41'6" |
| Deck Height | 44" unladen |
| King Pin Setting | 18" |
| Gooseneck | Short gooseneck with (1) king pin setting for tandem drive tractor, Full width pick-up throat c/w cable saver and cable anchor behind king pin, Tapered front ramp for easy in loading equipment over front neck in flat position, Greasable hinge pins 4140 heat treated/stress relieved, Hi-Lo gooseneck lock provision for use as an oilfield float |
| Main Frame | All fabricated QT-100 mainframe design c/w selective lightening holes, Main deck 8” x 4” I beam crossmembers @ 24” spacing |
| Live Rolls | Air operated 6” split liverolls mounted at the rear of main deck, (2) Air operated 6” split liverolls mounted at the rear of main deck |
| Bolsters | Full width, 28” wide bolsters between tires fitted 3/8” T100 top plate & 1” traction bars, 3/8” T100 wheel covers & 5/16” side skirts over the 1st & 2nd axles, Removable lightweight aluminum checker fenders over the 3rd axle |
| Beavertail | Full width gentle slope 20 degree beavertail fitted with 3/8” T100 top plate & 1” traction bars, Flip over 8.625” liveroll equipped with cable saver and (2) sets of support rollers |
| Wide Load Sign | Wide load sign & receiver tubes in front of rear light panel |
| Winches | (10) 3-bar strap winches mounted on side rail & J hooks opposite |
| Chain Pockets | Chain pocket opposite each crossmember on maindeck, (3) pair chain pockets on gooseneck (1) under each wheel bolster |
| Pin Pockets | (10) pair external single mount pin pockets, (5) pair internal single mount pin pockets, (1) pair quad pin pockets behind center deck liveroll, (1) pair of internal quads mounted on first bolster, (1) pair of internal quads mounted in front of liveroll, (1) pair mounted pin pockets in center behind king pin @ 10” inside width, (1) pair mounted pin pockets in center on beavertail pipe @ 10” inside width |
| Landing Gear | Lightweight tube style swing up dolly legs |
| Deck Material | 3” fir rough decking throughout |
| Suspension | (3) 30,000 lb. air ride suspension, Air scale and manual dump valve in enclosed box at rear side rail |
| Axles | (3) 25,000 lb. @ 93.5” track width (10’0” wide over tires) |
| Axle Spacing | 60" |
| Hubs/Drums | 10 stud hub piloted and cast outboard drums |
| Brake Linings | Quick change 16 ½ x 7 brake blocks & enclosed cam tubes |
| Slack Adjusters | Automatic slack adjusters |
| Wheels | 10 stud 8.25 x 22.5 pilot mount steel disc - silver |
| Tires | 275/70R-22.5 radial tires |
| Lighting | Integrated wiring harness, Rubber mounted LED sealed beam lighting system, (1) Pair swing out wide load lights at front and rear deck on side rail, (1) pair of amber strobe lights with switch in dump valve cabinet |
| Finish | Sandblasted, epoxy primer & Dupont Imron Elite urethane paint |
| Safety Stripe | Applied as per regulation |
| Warranty | 1st year – 100% parts & labour, 2nd year – 50% parts & labour, 3rd to 5th year – 50% parts only |
- Aluminum wheels, lightweight hubs, and Centri-fuse drums
- Different deck widths and lengths
- Tuff-Lift axle lift system (+)
- Full width beavertail with open wheel wells
- Booster provisions installed on rear frame
- Available for different tire and rim requirements
There are no videos at this time.
To view our inventory of in new and used lowbed trailers, click the button below.