Quad Axle Wagon Trailer

Centerline Quad Wagon

The Centerline Quad Axle dump trailer is built to last. With an extremely wear and crack resistant dump body, a heavy duty turntable, and a 110,000 psi tensile frame flange and webb, you will feel confident hauling this trailer. Save time with the radius 12 box design, which decreases material build up meaning you won't have to clean out the box after every load.


Well Equipped from $75,900

Financing Available

Click Here for Info

Request a Quote 


Centerline Quad Axle Wagon Turntable


A Jost QT-100 heavy duty turntable is used for optimal life expectancy and maximum strength with minimum weight.

Centerline Quad Axle Wagon Trailer Crossmember


Engineered laser cut flared end crossmembers increase torsional twist strength making the trailer much more stable.

Centerline Quad Axle Wagon Box Strength

Box Strength

The Centerline box is constructed from 400-500 brinell strength steel which is extremely wear and crack resistant, giving you a long life cycle.

Centerline Quad Axle Wagon Trailer Frame


We use a 110,000 psi tensile frame flange AND webb, while the majority of other trailers only use high tensile flanges.

Centerline Quad Axle Wagon Trailer Box Design

Box Design

The radius 12 box design decreases material build up saves you time by not having to clean out the box after every load.

Centerline Trailer Parallel Axles

Parallel Bearing Axles

Parallel bearing axles reduce the amount of friction and thus heat on the brake components, ultimately allowing for easier pulling capabilities.


Model RC-2500
Length 42'6"
Width 8’6”
Overall Height Top of sideboards: 123"
Box Length 24'6"
Side Wall Height 39"
Capacity 28.5 cu. yd. with 2” x 12” sideboards
Box Radius style box design
400-500 brinell tensile strength steel box construction
Formed tube style high tensile top beam
52” forward slope bulk head design
48” sloped tailgate c/w spreader chain slots
High tensile pin & bushing topping hinge assembly with (2) lubrication points
2” x 12” finished spruce sideboards
Ladder located on the left box sidewall over 4” axle
Frame QT-100 main frame rail flanges
Engineered laser cut flared ends crossmembers
Formed aluminum walking deck on front turntable area
Full width aluminum smooth rear mounted light panel
Hitch Square tube style draw bar c/w rubber bushed pivots & lightweight swivel screw jack
Premier pintle eye drawbar c/w urethane bushings
3 ton safety hooks & transport 70 chain on the underside of drawbar
 Turntable  QT-100 dolly turntable frame
Jost grease type roller bearing turntable assembly c/w remote grease manifold
Hoist 5 stage telescopic hoist
Single line system hydraulics: power up, gravity down
Quick coupler connection to suit truck wet line connection
Suspension (4) 25,000 lb. air ride suspension
Axles (4) 25,000 lb. axles @ 77.5” track c/w parallel spindles
Brakes 16 ½” x 7” Q Plus quick change brakes c/w non asbestos lining
Automatic slack adjusters
Axle bearing system & Stemco HP seals
Remote grease manifolds on front & rear suspension to lubricate brake components
Meritor/WABCO 2S/1M ABS           
Hubs & Drums 10 stud steel piloted parallel hubs, long wheel studs & outboard cast drums
Wheels 10 stud pilot mounted 8.25 x 24.5 steel disc wheels – silver
Tires 11R-24.5, on-off road radial tires
Electrical System Electric over air suspension dump & tailgate solenoid & (2) weigh gauges
LED rubber grommet mounted sealed lamps
Stop, turn, tail & ID lights are installed in rear of chassis
Front & side marker lights installed on dump body
Dual manual electric/over air solenoid tailgate trip
Midway turn signal on each side of trailer
Fenders Black plastic tub style fenders over all tires
Mudflaps Standard equipped full mud flap package
Load Cover Michel’s Dura-Flip c/w electric winder & mesh tarp
Finish Sandblasted, primed, and painted with PPG urethane paint
Sideboards to match trailer chassis
Document holder installed on frame side rail
Safety tape applied as per regulations
Warranty: 1st year – 100% parts & labour
2nd year – 50% parts & labour
3rd to 5th year – 50% parts only
  • Tuff-Lift axle lift system
  • Aluminum wheels, lightweight hubs, and Centri-Fuse drums
  • Michel’s Gravel Guard retractable PVC load cover
  • Electric drive tarp               
  • Load slide control electric box vibrator
  • Quick-Slide UHMW box liner
  • Air-Weigh scale
  • Sealed tailgate
  • Highlift tailgate




There are no videos at this time.

Search our Inventory