Centerline Side Dump Tandem Lead
The Centerline Side Dump Tandem Lead utilizes a one-piece round bottom tub design, which allows material to exit more easily from the box compared to a flat bottom or wedge style.
Trailer Features
Latch
The Centerline side dump tandem lead comes equipped with a quick change manual latch system for dumping curb or street side.
Crossmembers
Engineered laser cut flared end crossmembers increase torsional twist strength making the trailer much more stable.
Side Controls
Side controls located on the main frame allow ground crew to manually dump the box when needed.
Frame
We use a 110,000 psi tensile frame flange and webb, while the majority of other manufacturers only use high tensile flanges.
Dump Angle
The round box combined with a steep dump angle ensures optimum clean out.
Box Strength
The Centerline box is constructed from 400-500 brinell strength steel which is extremely wear and crack resistant, giving you a long life cycle.
| Model | SD-1700 |
| Width | 8'6" |
| Overall Length | 30'8" |
| Box Length | 15'10" |
| Overall Height | 10'5" unladen |
| Sidewall Height | 55" |
| Side Dump Capacity | 14.6 cu. yd. water level & 18 cu. yd. heaped |
| Box | Radius style box design, 400-500 brinell, 200,000 tensile steel strength body construction, Grease style tipping hinge bushings 16 ½” x 7” Q Plus quick change brake shoes, Automatic slack adjusters & parking brakes on all axles, Parallel axle bearing system & Stemco HP seals, Meritor/WABCO 2S/1M ABS |
| Frame | Fully fabricated hi-tensile steel main rails, Engineered flared end I beam crossmembers, 3/8” upper coupler plate with 2” king pin @ 30” setting, (2) speed crank landing legs, Quick change manual latch system for dumping curb or street side, Fixed mount fifth wheel on rear frame |
| Hoist | (2) double acting 2” hydraulic tipping cylinders |
| Hydraulics | Dual line system with high pressure supply & low pressure return, Quick coupler on front trailer, Air over electric frame mounted hydraulic selector valve, High pressure hydraulic supply hose & coupler for rear trailer for pup |
| Suspension | (2) 30,000 lb. air ride suspension |
| Axles | (2) 25,000 lb. axles @ 77.5” track |
| Brakes | 16 ½” x 7” Q Plus quick change brake shoes, Automatic slack adjusters & parking brakes on all axles, Parallel axle bearing system & Stemco HP seals, Meritor/WABCO 2S/1M ABS |
| Hubs & Drums | 10 stud steel piloted parallel hubs & outboard cast drums |
| Wheels | 10 stud pilot mounted 8.25 x 24.5 steel disc wheels – silver |
| Tires | 11R-24.5 16 ply tires |
| Electrical System | Mac dual electric/manual air dump & liquid filled weigh gauge, LED shock mounted sealed lamps, Integrated harness system, Seven pin standard lighting receptacles & six pin accessory receptacles, Lead trailer fitted with short pogo stick, coiled air & electrical lines to connect to pup, Stop, turn, tail & ID lights are installed in rear of chassis, Clearance lights at front & midway turn signal lights mounted in frame |
| Fenders | Formed checker aluminum fenders at front, Plastic tub style fenders over rear suspension |
| Mudflaps | Standard equipped full mud flap package |
| Load Cover | Roll-Rite electric driven load cover c/w mesh tarp |
| Finish | Sandblasted, primed, and painted with PPG urethane paint, Sideboards to match trailer chassis, Document holder installed on frame side rail |
| Safety Tape | Applied as per regulations |
| Warranty | 1st year – 100% parts & labour; 2nd year – 50% parts & labour; 3rd to 5th year – 50% parts only |
- Tridem axle configuration
- Quick-Slide UHMW box liners liners (+)
- Tuff-Lift axle lift system (+)
- Aluminum wheels, lightweight hubs and Centri-Fuse drums
There are no videos at this time.
To view our inventory of in stock and on order side dumps, click the button below.