Gincor Trailer Werx Live Bottom Trailer
Live bottom trailers provide a safe alternative to dump trailers by utilizing a horizontal rear discharge conveyor system that pushes material out of the back of the trailer at a controlled pace. This means that you can quickly and safely unload materials without raising the bed. Live bottom trailers are ideal for working off road, under high line wires, in tunnels, under bridges, inside buildings, on steep grades, and on high bank returns.
Trailer Features
Conveyer
A HD conveyor chain with cambered articulating flights minimize wear and assist in moving the material safely out of the back of the trailer.
Angled Sidewalls
Angled box sidewalls keep the product flowing smoothly onto the conveyor.
Insulated Walls
A 3” layer of Roxul R-15 insulation with aluminum skin is used on the hopper. This feature is great for asphalt haulers.
Hydraulic Motor
The Gincor live bottom floor trailer utilizes heavy duty planetary belt drive motors for increased service life as well high torque performance.
Box Strength
The box is constructed from Hardox 450, which is extremely wear and crack resistant, giving you a long life cycle.
Reversing Valve
The belt can be reversed to allow tailgate to seal.
| Model | LB3900 |
| Width | 8'6" |
| Overall Length | 36’5” |
| Box Opening | 7’10” x 33’9” |
| Overall Height | 10’4” to top of sideboards |
| Sidewall Height | 57" |
| King Pin Height | 50" |
| Live Bottom Trailer Capacity | Total volume 38.6 cu. yd. |
| Hopper | Roxul, R-15 insulation with aluminum skin on hopper exterior sidewalls, Hardox 450- 1/8” sidewall panels and sloped front bulkhead panel, 4” x 8” rectangular tube top rail perimeter construction, 2’ x 8” finished wood sidewall extensions to increase capacity, 40w-10g base panel with tubing frame construction tailgate c/w seal, Air locking tailgate & high lift air cylinders, Dual manual/electric over air tailgate solenoids mounted in enclosed cabinet, Aluminum release agent tank c/w nozzle and hose assembly mounted on frame side rail, Norgren oil lubricator & water filter mounted on frame side rail |
| Frame | High tensile QT100 (100,000 psi) I beam main frame, High tensile steel 3/8” upper coupler assembly with 2” king pin @ 16” setting |
| Live Floor | 36” abrasion resistant conveyor belt, HD 4” roller chain with cambered articulating flights to minimize wear, Dual Auburn 33 Planetaries & Eaton Direct drive hydraulic motors, Forward & reverse control valve for conveyor belt mounted on left rear side of trailer, Automatic chain oiler keeps roller chain lubricated for increased life cycle, Quick coupler dual line hose connection to suit tractor wet kit |
| Landing Gear | Jost 2 speed crank down landing gear |
| Suspension | 75,000lb air ride suspension @ 60” axle spacing |
| Axles | (3) 25,000lb @ 77” track width (8’.6” over the tires) |
| Brakes | Wabco/ Meritor 2S/1M anti lock braking system |
| Hubs & Drums | 10 stud steel piloted hubs & outboard cast drums |
| Wheels | (12) Alcoa 10 stud 8.25 x 24.5 Aluminum disc wheels- Clean Buff |
| Tires | On/off road 11R-24.5 radial tires |
| Electrical System | Manual/electric air dump solenoid and weigh gauge in enclose cabinet, LED rubber grommet mounted sealed lamps, Integrated harness system, Stop, turn, tail & ID lights are installed at rear side of trailer, Front, center & rear marker lights on top rail & midship turn lights on frame, Aluminum light panels mounted on rear sidewall of hopper, Backup lights & alarm mounted at rear of trailer |
| Fenders | Formed aluminum checker front fenders & plastic tub style fenders over tires |
| Mudflaps | (4) Mudflaps installed in front of dolly legs & behind 3rd axle tires |
| Load Cover | Electric driven retractable PVC load cover c/w manual backup winder |
| Ladder | Ladder mounted on left sidewall near center to access hopper |
| Finish | Sandblasted, Epoxy Primer & Genesis Polyurethane Paint |
| Safety Stripe | Applied as per regulation |
| Warranty | 1st year – 100% parts & labour, 2nd year – 50% parts & labour, 3rd to 5th year – 50% parts only |
- Various hopper material hardness and thickness
- Various axle configurations
- Lightweight wheels, hubs, and drums
- Tuff-Lift axle lift system (+)
- Electric drive tarp
- Aluminum tailgate
- Back up alarm, back up lights & strobe light(s)
- Camera systems to monitor unloading
- Aluminum or stainless steel half round renders
- Onboard scale system (+)
- Calcium sprayer (+)
There are no videos at this time.
To view our inventory of in stock and on order live bottom trailers, click the button below.