The K-Line Hydraulic Sliding Axle trailer utilizes a traveling axle system that provides the operator with easy ground-loading due to a low 7 degree load angle. A 30,000 lb. winch allows for equipment to be loaded effortlessly and safely onto the deck. This trailer is ideal in a variety of industries, particularly towing, construction, heavy equipment hauling, and storage containers.
Raising the lower deck allows for top deck loading when a little extra space is needed.
All trailers come equipped with a Warn 30,000 lb. hydraulic driven winch. Other winch capacities are available.
A low 7° load angle makes loading low clearance equipment a breeze.
The suspension slide cylinder is in the closed position during travel to protect from road debris.
Two top access storage boxes at the front of the top deck provide ample space for rigging hardware.
Remote grease lines make servicing the trailer’s brake components an easy process.
Model | SDHA45T-3 |
Hydraulic Sliding Axle Capacity | 45 ton rated capacity distributed evenly over 15’ of deck, 35 ton rated capacity distributed evenly over 10’ of deck |
Overall Length | 53'0" |
Overall Width | 10'0" |
Top Deck Length | 9’6” |
Lower Deck Length | 43’6” |
Lower Deck Height | 41” |
Gooseneck | Full width gooseneck for use on tandem tractor |
Deck Tilt | Lower deck tilts up on (2) 8” hydraulic cylinders to level with top deck, Sliding under carriage utilizing 6” double acting cylinder & greaseable rollers, Cylinder is in close position when travelling, Knife edge rear approach plate designed to lay flat on ground with deck tilted |
Main Frame | High tensile fabricate mainframe rails, Top deck crossmembers 4” beam @ 16”o.c., Lower deck crossmembers 4” I beam & 3” X 4”tubing alternating @ 12” o.c. |
Landing Gear | Holland Mark V 2-speed crank down landing gear |
Deck Material | 2” Rough fir decking throughout |
Chain Slots | Double ended chain slots in full length of trailer side rail top flange @ 24” o.c., (4) Double ended chain slots spaced across rear of main deck |
Winches | (24) Three bar load winches & J hooks opposite alternating left to right side |
Storage Box | Storage boxes built into the gooseneck at the front of trailer |
Hydraulics | Wet line connection at front of trailer, Float valve to lower deck for loading equipment, Hydraulic spool valves on gooseneck side rail |
Winch | Warn 30,000 lb hydraulic driven winch, 100’ cable, tail chain & hook assembly, Cable tensioner on winch, cable roller on rear of gooseneck and front of lower deck, Lodar wireless remote to operate winch, deck tilt and suspension slide |
Axles | (3) 25,000 lb. @ 83” track |
Suspension | (3) 30,000 lb. air ride suspension @ 60” spacing, Grease manifolds to lubricate brake components & suspension slide rollers, Air scale gauge and manual dump valve, Hostler brake release valve |
Hub Meter | (1) Analog hub meter mounted on wheel end |
Hubs/Drums | (6) 10 stud steel piloted hubs and outboard cast drums |
Brake Lining | Quick change 16 ½” x 7” brake blocks & enclosed cam tubes |
Slack Adjusters | Automatic slack adjusters |
Wheels | (6) 8.25” x 22.5” aluminum disc wheels, (6) 8.25” x 22.5” steel disc wheels |
Tires | 255/70R-22.5 low profile radial tires |
Lighting | Integrated wiring harness, Rubber mounted LED sealed beam lamps, Center mid ship turn/clearance lights, (2) Rear mounted amber strobe lights |
Finish | Slag blasted, epoxy primer and two part plastic paint in single color - black or silver |
Safety Stripe | Applied as per regulation |
Certificate Holder | Mounted on side rail of gooseneck |
Warranty | 1st year - 100% parts & labour |
To view our inventory of in stock and on order sliding axle trailers, click the button below.