Whatever you’re hauling – whether it is sand, clay, asphalt, or gravel – the Centerline clam dump trailer can help you with the job.
If the job requires you to pull the trailer through harsh terrain, individual guards on the front side of the brake pots are there to protect components against debris.
The steep end slopes combined with tapered side slopes greatly improves material cleanout.
Side controls installed on the trailer allow ground crew to control the flow of material from the hopper by manually opening and closing the gates.
Material exits easily from the hopper by way of a 68” x 83” gate opening and the steep end slopes and tapered side slopes further promote material cleanout.
Should the trailer ever need to come into contact with a push machine, a bolt-on push block assembly protects the rear.
The open frame design in the front and rear reduces weight and drag and increases your payload and profit.
Width | 8'6" |
Length | 40'2" |
Model | CS3800 |
Overall Height | Top of sideboards: 121" |
Target Load Area | 7'10"W x 16'11"L |
Bottom Hopper Opening | 68" x 97" - Gate spread width: 58" |
Gate Ground Clearance | 18" |
Capacity | 26.5 cu. yd. with 2” x 10” sideboards |
Axle Spread | 60" |
Frame | QT-100, I beam sub frame over tridem suspension, Lightweight engineered cross members, Diffuser plates & gussets located where required to support & relieve stress |
Upper Coupler | Rubber bushing, side oscillating upper 3/8” fifth wheel plates c/w 2” kingpin |
Hopper | 54” h formed 10 gauge carbon steel side wall panel w/ formed horizontal stiffener, Main frame beams: 4” x 4” square tube 10 gauge carbon steel 49% upper & 65% lower slope panel w/ formed horizontal stiffeners, 2” x 10” sideboards |
Gates | (2) 36”w x 127”h 1/4” formed gate panels w/ formed longitudinal stiffener, Composite 8” double acting air cylinders & quick return valves, Cylinder guards mounted on front & rear hopper opening, Electronic spread selection & clean out, 60 gallon air reservoirs c/w shut off valve & safety check valve, Mac electric over air operated solenoid gate control, Wilkerson lubricator & filter units located in a lockable side cabinet |
Push Block | Push bolt on rear |
Landing Gear | Lightweight drop tube dolly legs, pin type height adjustment |
Rock Shields | Heavy-duty; installed on front side of suspension |
Suspension | (3) 25,000 lb. air ride suspension, Dual electric/manual air dump & liquid filled weigh gauge |
Axles | (3) 25,000 lb. axles @ 77.5” track c/w parallel spindles |
Brakes | 16 ½” x 7” Q Plus brake shoes c/w enclosed camshafts, Automatic slack adjusters, Parallel axle bearing system & Stemco HP seals Meritor/WABCO 2S/1M ABS |
Hubs & Drums | 10 stud steel piloted hubs & cast steel drums |
Wheels | 10 stud piloted mounted steel 24.5 x 8.25 wheels – Silver |
Tires | 11R-24.5 radial 16 ply |
Electrical System | Integrated harness system LED rubber mounted sealed beam, Midway turn signal on each side of trailer |
Fenders | Aluminum checker fenders installed outside neck areas & rear tires |
Mudflaps | Standard equipped full mud flap package |
Load Cover | Michel’s Dura-Flip c/w manual chain drive winder |
Finish | Sandblasted, primed, & painted with PPG urethane paint Sideboards painted with PPG urethane paint - Black Single 4” & double 1” black body stripe |
Safety Tape | Applied as per regulations |
Weight | 7,360 kgs +/- 2% on steel wheels (subject to option changes) |
Warranty | 1st year – 100% parts & labour; 2nd year – 50% parts & labour; 3rd to 5th year – 50% parts only |
There are no videos at this time.
To view our inventory of in stock and on order belly dumps, click the button below.
Address
26180 – 114 Avenue,
Acheson, AB T7X 6R1
Phone
780-962-9100