Load Line Clam Belly Dump Trailer
Just like the rest of Load Line’s product line, this trailer has been designed for the rough Canadian terrain. With a bottom dump clamshell gate design for window unloading, the large gate opening minimizes material hang up and allows you to spread efficiently.
Trailer Features
Gate Opening
Bottom dump clamshell gate design for windrow unloading with a large gate opening to minimize material hang up.
Optimum Slope
Optimum hopper slope for better material cleanout.
Open Frame
Our open frame design in the front and rear reduces weight and drag, increasing payload and profit.
| Width | 8'6" |
| Length | 39'9" |
| Model | GCS-41 |
| Overall Height | Top of sideboards: 9’.9” unladen |
| Hopper Load Area | 94” W x 219” L |
| Gate Opening | 22” x 94” |
| Gate Ground Clearance | 22" |
| Capacity | 26.9 cu. yd. |
| Axle Spread | 60" |
| Frame | 6” x 4” Rectangular tube perimeter frame, Manufactured high tensile I beam sub frame over suspension, Engineered formed high tensile channel crossmembers, Diffuser plates & gussets located to support & relieve stress |
| Upper Coupler | Rubber bushing, side oscillating upper fifth wheel plates c/w 2” kingpin |
| Hopper | High tensile 55w-1/8” formed convex sidewall, High tensile 50w-1/8”-54°upper & lower slope panels, Aluminum walking deck and metal ladder in front of hopper |
| Gates | High tensile formed gate panels & formed horizontal stiffeners, Composite 8” x 24” double acting air cylinders & quick return valves, Harden gate hinge pins & grease type hinge bushings, Adjustable gate spread selection @ 2” increments, 60g air reservoir c/w shut off valve & safety check valve, Macc electric over air solenoid gate control valve, Bimba lubricator & filter units located in aluminum side cabinet, Par36 utility heat lamp installed in oiler cabinet |
| Bumper | Bolt on push block mounted on rear apron, Heavy duty 4” x 4” tubing bumper and uprights |
| Landing Gear | Light weight drop tube dolly legs, pin type height adjustment |
| Rock Shields | Rock shield installed on front side of 1st axle suspension |
| Suspension | (3) 23,000lb air ride suspension, Dual electric/manual air dump & liquid filled weigh gauge |
| Axles | (3) 25,000lb axles @ 77.5” track (8’6” over tires) |
| Bearings and Seals | 10 stud cast steel brake drums |
| Brakes | 16 ½” x 7” Q-plus quick-change brakes c/w enclosed camshafts, Type 30/30 brake chambers, top axle mount with pushrods to rear, Haldex automatic slack adjusters |
| Hubs & Drums | 10 stud cast steel brake drums |
| Wheels | 10 stud pilot mount steel 24.5 x 8.25 disc- White |
| Tires | 11R-24.5 radial 16 ply |
| Electrical System | Integrated harness system LED rubber mounted sealed beam, Rear red oval tail/stop/turn lights, Rear 2” center ID with front & rear corner 2” marker lights, Midway amber turn/clearance light per side |
| Fenders | Aluminum sloped fenders inside & outside neck areas & over all tires |
| Mudflaps | Standard equipped full mud flap package |
| Load Cover | Michel’s Dura-Flip c/w manual chain drive winder |
| Finish | Sandblasted, epoxy primer & Axalta urethane paint, Sideboards painted with Axalta urethane paint, Single 4” & double 1” vinyl body stripe |
| Safety Tape | Applied as per regulations |
| Warranty | (5) year Prorated on structural components built by Loadline, (1) year on non-structural components built by Loadline |
- Available in other axle configurations
- Tuff-Lift axle lift system (+)
- Tri-drive tractor compatible
- Spring ride suspension
- Aluminum wheels, lightweight hubs, and Centri-Fuse drums
- Accu-Tarp retractable PVC load cover
- Electric drive load covers
- Electronic gate sensor with cab controls
- Independent gate controls
- Load slide control electric box vibrators (+)
- Quick-Slide UHMW hopper liners (+)
- Calcium sprayer (+)
There are no videos at this time.
To view our inventory of in stock and on order belly dumps, click the button below.