Centerline 55T Hydraulic Detach Gooseneck

Centerline 55T Hydraulic Detachable Neck Lowboy

The Centerline 55T Hydraulic Detachable Gooseneck trailer is an attractive option for operators who need a front loading trailer and don’t want to spend a lot of time detaching and attaching the gooseneck. The hydraulic detachable gooseneck is both quicker and safer to remove over a mechanical detachable gooseneck, particularly on rough, uneven, or wet terrain. You can read more about the benefits of a hydraulic neck over a mechanical neck by clicking here.

Well Equipped from $122,900

Financing Available

Click Here for Info

Now In Stock


Centerline 55T Hydraulic Detach Gooseneck Lowboy

Hydraulic Neck

Ease of the hydraulic detachable gooseneck connection makes it the choice among operator’s.

Centerline 55T Hydraulic Detach Gooseneck Lowboy

Neck Extension

If you need to increase your payload, this trailer comes standard equipped with a pin on flip over neck extension for use with a tandem jeep.

Centerline 55T Hydraulic Detach Gooseneck Lowboy

Front Ramps

Tapered ramps mounted on front of deck crossmember for ease of loading when neck is removed.

Centerline 55T Hydraulic Detach Gooseneck Lowboy

Shallow Neck

A shallow drop neck provides greater versatility by having more ground clearance than a double drop and a lower deck height than a single drop.

Centerline 55T Hydraulic Detach Gooseneck Lowboy


We use a 30” wide bolster that has a QT100 3/8” top plate for added strength when loading equipment onto the trailer.

Centerline 55T Hydraulic Detach Gooseneck Lowboy


Full width beavertails with traction bars and QT100 3/8” top plates, makes loading equipment onto the deck very easy.

Centerline 55T Hydraulic Detach Gooseneck Lowboy



Length 55’8” w/o extension
62’0” with extension
Width 10'0"
Gooseneck Length 12’4” without extension
Main Deck Length 26’0”
Rear Frame Length 17’4”
Deck Height 36” unladen
Ground Clearance 18”
Capacity 55 ton distributed evenly over 15' deck
Gooseneck Narrow hydraulic gooseneck with (1) king pin position for use on a tandem axle tractor
Hydraulic flip over neck extension for use with a tandem axle jeep
Hydraulic adjustable gooseneck to lower and raise main deck or adjust king pin
Hydraulic actuated arm assembly to support gooseneck when detached
Electric start Honda 13 hp hydraulic power pack mounted in the gooseneck
3/16” aluminum checker plate fenders mounted on main deck
Main Frame

All fabricated QT100 mainframe design c/w selective lightening holes

Crossmember Main deck W10 @ 12lb wide flange I beam crossmembers @ 24” spacing
Front Ramps Tapered ramps on front deck of crossmember
Landing Gear Lightweight flip back dolly legs - for parking empty trailer only
Deck Material 3” rough fir decking on main deck
Bolsters Half bolsters in front of 1st axle tires for easy transition onto main deck
Full width, 30” wide bolsters c/w QT-100-3/8” top plate & cutaway center to nestle boom
Beavertail Full width beavertail, QT-100-3/8” top plate & 1” grouser bars spaced at 10” o.c.
Provisions for single axle fish mouth common air booster
Wide Load Wide load D-sign mounted in front side of rear light panel
Wide load flag pockets mounted on front side of beavertail
Wide load flap pockets mounted on outside edge of swingout lights
Chain Pockets H/D chain pockets opposite each crossmember on main deck
(3) pair chain pockets installed on gooseneck side webb
Chain pockets mounted on bolster underside ends & beavertail side rail
Load Winches (5) three bar winches spaced along main deck side rails c/w J hooks opposite
Suspension (3) 30,000 lb. air ride suspension @ 60” axle spacing
Air scale & manual dump valve in enclosed box at rear side rail
Replaceable jerk chains installed on all axles
Axles (3) 25,000 lb. @ 93’5” track width (10’0” wide over tires)
5/8” wall axles on 1st and 2nd and 3/4” wall axle on 3rd
Brakes Quick change 16 ½ x 7 brake blocks & enclosed cam tubes
Automatic slack adjusters and parking brakes on (3) axles
Hubs & Drums

10 stud steel piloted hubs and cast outboard drums

Wheels 10 stud pilot mounted steel disc 8.25” x 22.5” wheels - silver            
Tires 275/70R-22.5 on/off road radial tires
Lighting Integrated wiring harness with seven pin female receptacles
LED rubber mounted sealed beam lighting system
(2) pair swing out wide load lights at front and rear deck of lowbed
(2) amber strobe lights mounted in beavertail cross pipe c/w switch in dump valve cabinet
Finish Sandblasted, epoxy primer & Dupont Imron Elite urethane paint
Safety Stripe Applied as per regulation
Certificate Holder

Mounted on webb of gooseneck

  • Tuff-Lift axle lift system
  • Available in different main rail profiles, widths & lengths
  • Available in 40-120 ton main frame capacities
  • Single or double drop neck profiles
  • Rear deck pin joint for deck extensions and adjusting camber
  • Electric start hydraulic power pack mounted in the gooseneck
  • Hydraulic actuated flip-over linkage on gooseneck extension
  • Collapsible adjustable boom stand mountain in boom trough
  • Available in different tire and rim combinations



There are no videos at this time.

Search our Inventory