Loadline Cross Gate Belly Dump Trailer

Load Line Crossgate Belly Dump Trailer

The Load Line Crossgate Belly Dump Trailer is a reliable and affordable option for any user. Fast acting close under load gates with adjustable gate stops control spread and the slope of the hopper is optimum for material cleanout. With many options available, you can customize this trailer to fit your specific needs.


Well Equipped from $58,900

Financing Available

Click Here for Info


Loadline Cross Gate Belly Dump Trailer

Gate Opening

Bottom dump cross gate; fast acting close under load gates with adjustable gate stops for controlled spread.

Loadline Cross Gate Belly Dump Trailer

Optimum Slope

Optimum hopper slope for better material cleanout.

Loadline Cross Gate Belly Dump Trailer

Open Frame

Our open frame design in the front and rear, reduces weight and drag increasing payload and profit.


Model CDCU-38
Length 38'0"
Width 8'6"
Overall Height 112" to top of sideboards
King Pin Setting 16” @ 50” high
Target Load Area 18’3”
Top Hopper Opening 94” x 219”
Bottom Hopper Opening 22” x 94”
Gate Ground Clearance 24”
Capacity 25.5 cu. yd. with 2” x 6” sideboards
Axle Spread 60"
Frame Manufactured wide flange beam sub frame over suspension
Lightweight engineered cross members
Diffuser plates & gussets located where required to support & relieve stress
Upper Coupler Rubber bushing, side oscillating upper fifth wheel plate c/w 2” kingpin

50” h formed 10 gauge side wall panel, formed horizontal stiffener
Main frame beams: 6” x 4” square tube
10 gauge 50% upper & 52.5% lower slope panel, formed horizontal stiffeners
2” x 6” finished spruce sideboards

Gates 24”h x 96”w formed gate panels, formed horizontal stiffeners
Composite 8” x 24” double acting air cylinders & quick return valves
Dual air reservoirs c/w shut off valve & safety check valve
Electric over air solenoid gate control valve
Lubricator & filter units located in a lockable side cabinet
Push Block Push block mounted on rear apron
Bumper Heavy duty 4” x 4” tubing bumper and uprights
Landing Gear Lightweight drop tube dolly legs, pin type height adjustment
Rock Shields Heavy duty rock shield installed on front side of suspension
Fenders Aluminum checker fenders installed inside & outside neck areas & rear tires
Suspension (3) 23,000 lb. air ride
Dual electric/manual air dump & liquid filled weigh gauge
Axles (3) 25,000 lb. axles @ 77.5” track (8’6” over tires)
Brakes Automatic slack adjusters
Meritor/WABCO 2S/1M ABS           
Hubs & Drums 10 stud steel piloted hubs & cast steel drums
Wheels 10 stud piloted mounted steel 24.5 x 8.25 disc wheels – white
Tires 11R-24.5 radial 16 ply
Electrical System Integrated harness system
LED rubber mounted sealed beam
Midway turn signal on each side of trailer           
Mudflaps Standard equipped full mud flap package
Load Cover Michel’s Dura-flip mesh load cover c/w manual chain drive winder
Finish Sandblasted, primed, & painted with (1) colour in PPG urethane paint
Sideboards painted with (1) colour in PPG urethane paint
Single 4” & double 1” black body stripe
Safety Tape Applied as per regulation
Warranty: 5 year pro-rated warranty on structural components manufactured by Loadline
1 year warranty on non-structural components manufactured by Loadline
  • Available in other axle configurations
  • 32 cu. yd. hopper in lieu of 25.5 cu. yd.
  • Tuff-Lift axle lift system
  • Tridrive tractor compatible
  • Aluminum wheels, lightweight hubs, and Centri-Fuse drums
  • Accu-Tarp retractable PVC load cover               
  • Electric drive load covers
  • Electronic gate sensor with cab controls
  • Electric hopper vibrators
  • Independent gate controls
  • Plastic UHMW easy dump hopper liners               

Loadline Cross Gate Belly Dump Trailer


There are no videos at this time.

Search our Inventory