Live Bottom Trailers

Gincor Trailer Werx Live Bottom Trailer

Live bottom trailers provide a safe alternative to dump trailers by utilizing a horizontal rear discharge conveyor system that pushes material out of the back of the trailer at a controlled pace. This means that you can quickly and safely unload materials without raising the bed. Live bottom trailers are ideal for working off road, under high line wires, in tunnels, under bridges, inside buildings, on steep grades, and on high bank returns.


Well Equipped from $94,900

Financing Available

Click Here for Info

Request More Info


Gincor Live Bottom Trailersr


A HD conveyor chain with cambered articulating flights minimize wear and assist in moving the material safely out of the back of the trailer.

Gincor Live Bottom Trailers

Angled Sidewalls

Angled box sidewalls keep the product flowing smoothly onto the conveyor.

Gincor Live Bottom Trailers

Insulated Walls

A 3” layer of R-11 insulation with aluminum skin is used on the outside of the hopper. This feature is great for asphalt haulers.

Gincor Live Bottom Trailers

Hydraulic Motor

The Gincor live bottom trailer utilizes heavy duty planetary belt drive motors for increased service life as well as high torque performance.

Gincor Live Bottom Trailers

Box Strength

The Gincor live bottom trailer box is constructed from 400 - 500 Brinell, 210,000 ksi tensile strength steel, which is extremely wear & crack resistant, giving you a long life cycle.

Gincor Live Bottom Trailers

Reversing Valve

The belt can be reversed to allow tailgate to seal.

Not in the market for a trailer, but know someone who might be? Take advantage of our Referral Program. Click here for more information >


Model LB3900
Overall Length 39’0
Box Opening 7’10” x 36’6”
Width 8’6”
Overall Height 10’4” to top of sideboards
Sidewall Height 57" 
King Pin Height 49"
Capacity Total volume 44 cu. yd.
Box 3” layer of R-11 insulation with aluminum skin on hopper
400 - 500 Brinell tensile strength steel box construction
4” x 8” rectangular tube top rail perimeter construction
2’ x 6” finished wood binwall extensions to increase capacity
400 - 500 Brinell tensile strength steel sloped front bunkhead panel to minimize material hang up
AR200 – 3/16” panel with tubing frame construction tailgate c/w seal
Air locking tailgate & high lift air cylinders
Dual manual/electric over air tailgate solenoids mounted in enclosed cabinet
Frame High tensile QT100 (100,000 psi) I beam main frame
High tensile steel upper coupler assembly with 2” king pin @ 18” setting
Live Floor 36” abrasive & oil resistant conveyor belt rated for up to 350 degrees
HD conveyer chain with cambered articulating flights to minimize wear
Dual Auburn 33 Planetaries & Eaton Direct drive hydraulic motors
Belt & tailgate can be operated in tractor or at left side of trailer near rear
Automatic chain oiler keeps conveyer well lubricated for increased life cycle
Quick coupler dual line hose connection to suit tractor wet kit
Bumper Paver style rear bumper c/w aluminum light panel
Landing Gear Jost 2 speed crank down dolly legs
Suspension (3) 30,000 lb. air ride @ 60” axle spacing
Axles (3) 25,000 lb. @ 77” track width (8’6” over the tires)
Brakes Crewson auto slack adjusters & parking brakes on all axles
Meritor/WABCO 2S/1M ABS
Hubs & Drums 10 stud steel piloted parallel hubs & outboard cast drums
Wheels 10 stud powder coated 8.25 x 24.5 steel disc wheels - Silver
Tires 11R-24.5 radial 16 ply tires
Electrical System Electric/manual air dump solenoid and weigh gauge in enclose cabinet
LED rubber grommet mounted sealed lamps
Integrated harness system
Stop, turn, tail & ID lights are installed in rear of chassis
Front, center, & rear marker lights on top rail & midship turn lights on frame
Fenders Formed aluminum checker front fenders & 180 degree plastic tube fenders over tires
Mudflaps Standard equipped full mud flap package
Load Cover Electric driven retractable PVC load cover c/w manual backup winder
Finish Sandblasted, primed & painted with PPG urethane finish- Silver or Black
Safety Stripe Applied as per regulation
Weight 8,350 kgs +/- 2%
Warranty: 1st year – 100% parts & labour
2nd year – 50% parts & labour
3rd to 5th year – 50% parts only
  • Various hopper material hardness and thickness
  • Various axle configurations
  • Lightweight wheels, hubs, and drums
  • Tuff-Lift axle list system
  • Calcium sprayer
  • Electric drive tarp            
  • Aluminum tailgate
  • Air-Weigh scale system
  • Back up alarm, back up lights & strobe light(s)
  • Camera systems to monitor unloading
  • Aluminum or stainless steel half round renders  


Search our Inventory