Gincor Flat Deck Trailer

Gincor Trailer Werx Tridem Flat Deck

The Gincor Trailer Werx Flat Deck trailer is an affordable and reliable option for operators looking for a flat deck trailer that has been engineered to handle general freight applications.

Well Equipped from $46,900

Financing Available

Click Here for Info

Request a Quote 


Gincor Flat Deck Trailer


100,000 psi high tensile steel is used for the flange and webb, making a strong trailer with a long service life.

Gincor Flat Deck Trailer


Parallel axle spindles with larger inner & outer bearings increases fuel efficiency & wheel end life by lowering rolling resistance.

Gincor Flat Deck Trailer

Sliding Suspension

The Gincor flat deck trailer is equipped with a 60" sliding suspension with front and rear locating pins.

Gincor Flat Deck Trailer

Two-Speed Landing Gear

The Gincor flat deck trailer is equipped with Jost two-speed landing gear, which has a static load rating of 170,000 lbs.

Gincor Flat Deck Trailer

Load Securement

3-bar winches & J hooks; all tested to meet current load securement regulations.

Gincor Flat Deck Trailer

Tow Plate

The Gincor flat deck trailer has a heavy duty 1" rear center mounted tow plate should you ever need to be towed.



Capacity 60,000 lb in 10’ or 80,000 lb over entire length
Length 53'0"
Width 8'6"
Deck Height

Front: 61" Rear: 50"

Upper Coupler

GR80W - 5/16" @ 50" Height

King Pin Setting

2" king pin @ 24" setting

Swing Radius 136" from king pin to front side of landing gear
Compatible with tandem & tridrive tractors
Main Frame High tensile manufactured positive camber I Beam
5" x ½" T130 flanges and GR80W webb

4" @ 3.2 lb/ft junior beam @ 12" spacing

Side Rail

6" channel @ 8.2lb/ft

Landing Gear

Jost A440 two speed crank down - crank located on road side

Rub Rail

3/8" x 3" flat bar full length of trailer mounted side rail

Stake Pockets

4" deep @ 24" o.c. on sides & (4) across front and rear

Pipe Spool

Single 1¼" sch40 pipe spacers @ 24" o.c.

Deck Material

1 1/8" fir shiplap c/w (2) screws per board per crossmember

Load Securement (26) 3-bar weld on winches on side rail
Mounted @ 24" o.c. alternating from roadside to curbside
(26) J Hooks opposite winches mounted on side rail

4" x 4" horizontal and vertical tubing

Tow Plate

Heavy duty rear center mounted plate to accept a large clevis

Dock Bumper

(2) Rubber inboard mounted blocks on rear

Axles (3) 25,000 lb @ 77.5" track (8’6" wide over tires)
Parallel axle bearing system & Stemco HP seals
Axle Spacing 60"
Suspension (3) 23,000 lb air ride
60" slider travel @ 6" increments c/w manual lock level & (2) pins
Manual dump valve & weigh gauge in weather proof box
Brake Linings

16.5" x 7" extended service brake linings

Bearing Lubricant

Multi-grade 80/90w gear oil

Slack Adjusters

Crewson Stemco

ABS System

Meritor Wabco 2S/1M

Hub & Drums

Steel 10 stud piloted hub & cast steel drums


11R-24.5 radial tires


10 stud 8.25 x 22.5 pilot mount steel disc - white

Electrical System Integrated wiring harness system
LED rubber shock mounted seal beam lamps

Sandblasted, primed, & painted with DuPont Imron Elite urethane paint


Applied as per CMVSS regulations

Warranty: 1st year – 100% parts & labour
2nd year – 50% parts & labour
3rd to 5th year – 50% parts only
  • Tuff-Lift axle lift system
  • Available in various lengths and axle configurations
  • Lightweight to extreme duty main frame design
  • Lightweight wheels, hubs, and drums
  • Air-Weigh self-weigh scaling system
  • Aluminum toolbox



There are no videos at this time.

Search our Inventory