fbpx

Centerline 40T Folding Neck Lowbed

Centerline 40T Folding Gooseneck Lowboy in Edmonton

Centerline 40T Tridem Folding Gooseneck Lowbed

Folding gooseneck lowbeds are the trailers of choice for operators needing a versatile solution with both rear and front loading abilities. The mechanical folding neck allows the trailer to be pulled in two positions: drop deck position for equipment with height constraints or with the neck straightened out to haul longer loads such as camp shacks.

Call for Pricing

1-877-962-9110

Trailer Features

Gooseneck

We use a tapered full width pickup throat to aid in loading equipment over the gooseneck.

Split Liverolls

Air controlled high lift rear deck liverolls allow for easy unloading of short skid equipment.

Neck Liveroll

6” liveroll on back of gooseneck prevents tractor winch cable damage.

Rear Tail

Combination beavertail/flip over liveroll makes this trailer very versatile.

Center Liveroll

Air controlled high lift center deck liveroll allows for easy unloading of long skid equipment.

Load Securement

This trailer is equipped with chain pockets opposite each crossmember and (10) load winches.

Model SD40T-FG-3
Folding Gooseneck Capacity 40 ton distributed evenly over 20’ of deck
Width 10'0"
Length Liveroll down: 52’9”, Liveroll up: 51’6”
Main Deck Length 26’
Overall Lower Length 41'6"
Deck Height 44" unladen
King Pin Setting 18"
Gooseneck Short gooseneck with (1) king pin setting for tandem drive tractor, Full width pick-up throat c/w cable saver and cable anchor behind king pin, Tapered front ramp for easy in loading equipment over front neck in flat position, Greasable hinge pins 4140 heat treated/stress relieved, Hi-Lo gooseneck lock provision for use as an oilfield float
Main Frame All fabricated QT-100 mainframe design c/w selective lightening holes, Main deck 8” x 4” I beam crossmembers @ 24” spacing
Live Rolls Air operated 6” split liverolls mounted at the rear of main deck, (2) Air operated 6” split liverolls mounted at the rear of main deck
Bolsters Full width, 28” wide bolsters between tires fitted 3/8” T100 top plate & 1” traction bars, 3/8” T100 wheel covers & 5/16” side skirts over the 1st & 2nd axles, Removable lightweight aluminum checker fenders over the 3rd axle
Beavertail Full width gentle slope 20 degree beavertail fitted with 3/8” T100 top plate & 1” traction bars, Flip over 8.625” liveroll equipped with cable saver and (2) sets of support rollers
Wide Load Sign Wide load sign & receiver tubes in front of rear light panel
Winches (10) 3-bar strap winches mounted on side rail & J hooks opposite
Chain Pockets Chain pocket opposite each crossmember on maindeck, (3) pair chain pockets on gooseneck (1) under each wheel bolster
Pin Pockets (10) pair external single mount pin pockets, (5) pair internal single mount pin pockets, (1) pair quad pin pockets behind center deck liveroll, (1) pair of internal quads mounted on first bolster, (1) pair of internal quads mounted in front of liveroll, (1) pair mounted pin pockets in center behind king pin @ 10” inside width, (1) pair mounted pin pockets in center on beavertail pipe @ 10” inside width
Landing Gear Lightweight tube style swing up dolly legs
Deck Material 3” fir rough decking throughout
Suspension (3) 30,000 lb. air ride suspension, Air scale and manual dump valve in enclosed box at rear side rail
Axles (3) 25,000 lb. @ 93.5” track width (10’0” wide over tires)
Axle Spacing 60"
Hubs/Drums 10 stud hub piloted and cast outboard drums
Brake Linings Quick change 16 ½ x 7 brake blocks & enclosed cam tubes
Slack Adjusters Automatic slack adjusters
Wheels 10 stud 8.25 x 22.5 pilot mount steel disc - silver
Tires 275/70R-22.5 radial tires
Lighting Integrated wiring harness, Rubber mounted LED sealed beam lighting system, (1) Pair swing out wide load lights at front and rear deck on side rail, (1) pair of amber strobe lights with switch in dump valve cabinet
Finish Sandblasted, epoxy primer & Dupont Imron Elite urethane paint
Safety Stripe Applied as per regulation
Warranty 1st year – 100% parts & labour, 2nd year – 50% parts & labour, 3rd to 5th year – 50% parts only
  • Full width beavertail with open wheel wells
  • Booster provisions installed on rear frame
  • Available for different tire and rim requirements

There are no videos at this time.

To view our inventory of in new and used lowbed trailers, click the button below.

    Customize this trailer to suit your exact needs

    Tell us a bit about what you’re looking for and one of our sales representatives will be in touch with a quote.

    First Name*

    Last Name*

    Phone Number*

    Email Address*

    Which trailer are you interested in?

    Model*

    Your Message